Looking for:
- Orangeiot lock manual |
Orangeiot lock manual. OrangeIOT Keypad Lock Reset Instructions
In this article you will find all the steps you need to program your new or existing OrangeIOT Keyless entry lock. The OrangeIOT keyless door lock is a smart lock that works with the help of a mobile application. The lock has an inbuilt sensor that detects when you approach the door.
It then automatically unlocks the door and allows you to enter your home without using any physical keys. The master code is used to set up the lock and can be used to reset it if you forget your password or key code. Note: The Master Code sequence is always in a forward number sequence The new and updated Master Code must always be completely different from the former one. The forward, backward and repeated number sequence are not supported. A onetime user code is a temporary password that is used only once.
This code can be used when you have forgotten your regular lock code, or if you have lost your mobile device. A one-time user code is an extra layer of security that is used to prevent unauthorized access to your home. This can be useful in a number of situations, such as when someone has lost their keys or needs to get inside in an emergency. The auto-lock feature enables to automatically lock the lock after a particular time. This aids in keeping your door locked whenever you forget to lock it.
You can enable the auto-lock feature by following the stated steps:. In order to disable the Auto-Lock feature, follow the same steps except for a little change. Press number 2 instead of 1 in the last step. The OrangeIOT Lock permits you to adjust your preferred time delay seconds before it auto-locks. To do this, follow these steps.
The main purpose of a keyless entry lock is to allow you to enter your home without carrying around keys. This can be very convenient, especially if you have a lot of other things in your hands or pockets. Once this is done, simply scan the QR code on the lock with your phone and enter the code provided by your doorbell camera or doorbell intercom system.
It can also be used on glass panels up to 2mm thickness. It takes about 3 hours to fully charge from empty using the USB cable provided in the box with your purchase. Seems like you are looking for it.
Table Of Contents. What is the purpose of a keyless entry lock? What type of batteries does it use? How long does it take to charge the device? Author Recent Posts. I am locksmith by profession and have been working with smart locks for past 8 years. During these years, I have learnt a lot about different types of locks and the problems they cause. I am always happy to share my knowledge and experience of different lock models. Latest posts by Wayne see all.
Comments
Post a Comment